Hopper Magnets for Plastic Moulding Machines: Saving Screws and Barrels
Regrind and recycled granules carry small iron that scores screws, damages check rings and blocks nozzles. Here is how a hopper magnet protects moulding and extrusion machines.
Plastic processors in Pakistan use a lot of regrind and recycled material, and for good reason: it cuts cost. But regrind and recycled granules carry iron. Small pieces from granulator blades, staples, wire, screws and bits of machine hardware all end up in the hopper, and from there they go into the screw.
What iron does to a moulding machine
- Screw and barrel: hard particles score the flights and the barrel wall, and the screw starts to lose output.
- Check ring: iron can damage the non-return valve, causing shot size to vary.
- Nozzle and hot runner: small pieces block nozzles and gates, leading to short shots and downtime.
- Moulds: metal reaching the cavity can mark or damage the mould surface.
- Product: metal in a moulded part is a defect, and for some customers a serious one.
The hopper magnet
A hopper magnet is a short housing with a magnetic grate inside. It bolts between the hopper and the feed throat of the machine, so every granule passes through it on the way in. It is the last line of defence before the screw.
Useful features to look for:
- Flanges drilled to your machine, so it fits without changing anything.
- A sight glass, so the operator can see when the tubes need cleaning.
- A pull-out grate, so cleaning takes a minute.
- A slide gate above the grate, so the hopper does not have to be emptied to clean.
- Neodymium tubes, because the iron in regrind is usually small.
Other points to protect
Granulators
Granulator blades are themselves a source of iron as they wear and chip. A grate magnet in the granulator discharge catches it before the regrind goes into storage.
Vacuum loaders and conveying lines
Many plants feed machines from a central system by vacuum. A pneumatic line magnet in the conveying pipe protects every machine on that line at once.
Dryers
A magnet at the inlet or outlet of a dryer hopper protects both the dryer and the machine it feeds.
Non-ferrous metals
Recycled material can also carry brass, copper and aluminium, which a magnet will not catch. A metal detector at the granulator or on the feed line finds these.
Extrusion lines too
Pipe, film and profile extruders have the same problem, with an extra one: iron can block the screen pack and damage the die. A hopper magnet on the extruder throat works the same way as on a moulding machine.
Cleaning
On machines that run mostly regrind, check the magnet at least once a shift. On machines that run only virgin granules, once a day is often enough. The sight glass helps. If iron is visible on the tubes, it is time to clean.
Is it worth it?
Compare the price of a hopper magnet with the price of a new screw and barrel, or a hot runner repair, and the answer is usually clear. It also saves the hidden costs: rejected parts, short shots, and time spent stripping a blocked nozzle.
Send us the make and model of your machine, or the throat size and flange drilling, and we will make a hopper magnet to fit. Request a quote.
Frequently asked questions
Will a hopper magnet fit my machine?
It is made to your throat size and flange drilling, so it fits without changes to the machine.
Does a hopper magnet catch aluminium or brass?
No. Use a metal detector for non-ferrous metals.
How often should a hopper magnet be cleaned?
At least once a shift on machines running regrind, and daily on virgin material.
Equipment mentioned in this article
Metal Separator (Metal Detector)
An in-line metal detection unit that senses ferrous, non-ferrous, and stainless steel contamination in product flow and triggers automatic rejection.
ViewHopper Magnet
A compact magnet housing that bolts between the hopper and the feed throat of an injection moulding, blow moulding or extrusion machine.
ViewGrate Magnet (Magnetic Grill)
A frame of stainless steel magnetic tubes that sits in a hopper, chute or bin inlet and holds back iron fines, nails and bolts from dry product.
ViewPneumatic Line Magnet
A flanged magnet housing fitted directly into a pneumatic conveying pipe, catching iron from powders and granules moving at speed under pressure or vacuum.
View