Magnetic SeparatorsManufactured in Pakistan
Pneumatic Line Magnet
In-line separator for powders blown through conveying pipes
Pneumatic conveying moves product fast, which makes iron hard to catch. The pneumatic line magnet is built as a short pipe section that bolts into the line with matching flanges or couplings. Inside, a curved magnet plate or a bullet shaped core puts a strong field across the whole bore, and the housing is made to hold line pressure without leaks. A hinged door gives access to the magnet for cleaning. We supply it in pipe sizes used on local and imported conveying systems, for both dilute and dense phase lines.
- Bolts straight into the conveying pipe
- Pressure-tight housing for blowing or vacuum lines
- Full-bore field so nothing passes untreated
- Hinged door for cleaning
- Mild steel or stainless construction
- Matching flanges or quick couplings
How it works
Product travels through the housing in the air stream. The magnet faces the flow so particles pass through the strongest part of the field. Iron is pulled out of the stream and held against the magnet face, protected from being blown away by a lip or pocket. The line is stopped and the door opened to wipe the magnet clean.
Specifications
| Pipe Size | 50–200 mm(Flanged or coupled) |
|---|---|
| Magnetic Field Intensity | Up to 10,000 Gauss(At magnet face) |
| Line Type | Pressure or vacuum(Dilute or dense phase) |
| Material | Mild steel or SS 304(Per product) |
| Power Requirement | None(Fully passive operation) |
Final datasheet issued per confirmed application.
Applications
Flour and feed blowing lines, plastic granule transfer to silos, sugar and salt conveying, cement and fly ash lines, and vacuum loaders on moulding machines.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
Will it hold line pressure?
Yes. The housing and door are sealed and made for the pressure or vacuum of your system.
Does it cause blockages?
No. It keeps the full bore of the pipe, so product moves through without restriction.
Where should it be fitted?
Before the receiver, silo or machine you want to protect, on a straight section of pipe.
Request a quote
Quotation for the Pneumatic Line Magnet
Five fields. You will have an indicative specification and price as soon as possible.
More magnetic separators
All magnetic separatorsLiquid Trap Magnet
A pressure-rated housing with magnetic rods inside, fitted in a pipeline to remove iron particles from oils, syrups, chemicals, paints and slurries.
ViewMagnetic Coolant Separator
A rotating magnetic drum unit that lifts fine steel particles out of the coolant from grinding and machining, so cleaner coolant goes back to the machine.
ViewWet Drum Magnetic Separator
A magnetic drum running in a tank of slurry, used to recover magnetite or to remove iron-bearing particles from mineral and ceramic slurries.
ViewRare Earth Roll Separator
A thin belt running over a rare earth magnetic roll that pulls out weakly magnetic impurities such as iron oxide and mica from dry sand, feldspar and other minerals.
View