Magnetic SeparatorsManufactured in Pakistan
Hopper Magnet
Fits at the throat of a moulding or extrusion machine
Plastic processors lose screws and barrels to small pieces of iron hiding in regrind and recycled granules. A hopper magnet stops them at the last point before the machine. It is a short housing with a magnetic grate inside, made to bolt between your existing hopper and the feed throat, so no change to the machine is needed. A sight glass lets the operator see the tubes, and the grate pulls out from the side for cleaning without removing the hopper. We make them for round and square throats on Pakistani, Chinese and European machines.
- Bolts between hopper and machine throat
- Round or square flange drilled to your machine
- Sight glass to check build-up without stopping
- Pull-out grate for cleaning
- Optional slide gate above the grate
- Neodymium tubes for small iron in regrind
How it works
Granules fall from the hopper through the housing and pass between neodymium tubes before entering the throat. Iron pieces are pulled onto the tubes and held. A drawer or side door gives access to the grate, and a slide gate above it can be closed during cleaning so the machine keeps its material.
Specifications
| Throat Size | 50–200 mm(Round or square) |
|---|---|
| Magnetic Field Intensity | Up to 12,000 Gauss(At tube surface) |
| Flange | Drilled to your machine(Local, Chinese or European) |
| Inspection | Sight glass(Standard) |
| Power Requirement | None(Fully passive operation) |
Final datasheet issued per confirmed application.
Applications
Injection moulding, blow moulding, film and pipe extrusion, masterbatch and compounding lines, and recycling plants processing regrind.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
Will it fit my machine?
Share the throat size and flange drilling, or the machine make and model, and we will make the housing to suit.
Can I clean it without emptying the hopper?
Yes, if you take the version with a slide gate. Close the gate, pull out the grate, clean and refit.
Does it slow down material flow?
No. The tubes are spaced for granules so flow into the throat is not restricted.
Request a quote
Quotation for the Hopper Magnet
Five fields. You will have an indicative specification and price as soon as possible.
More magnetic separators
All magnetic separatorsDrawer Magnet
A dust-tight housing with two or three rows of magnetic tubes that slide out like drawers, fitted in-line on gravity chutes carrying powders and granules.
ViewRotating Grate Magnet
A grate magnet whose tubes rotate slowly, so sticky or poor-flowing product such as sugar, cocoa or milk powder keeps moving instead of blocking the chute.
ViewPneumatic Line Magnet
A flanged magnet housing fitted directly into a pneumatic conveying pipe, catching iron from powders and granules moving at speed under pressure or vacuum.
ViewLiquid Trap Magnet
A pressure-rated housing with magnetic rods inside, fitted in a pipeline to remove iron particles from oils, syrups, chemicals, paints and slurries.
View