Skip to content

Magnetic Brakes & ClutchesManufactured in Pakistan

Magnetic Powder Clutch

Controlled torque transfer for winders and soft starting

A magnetic powder clutch sits between a running motor and a winder, passing only as much torque as the current tells it to. As the roll grows bigger, the controller lowers the torque so the material is wound at constant tension instead of getting tighter on the outside. The same clutch is used to start heavy loads softly, to limit torque so a machine cannot be overloaded, and on test rigs. Input and output are fully separate, so the motor can run at constant speed while the load speed changes.

  • Torque set by DC current
  • Smooth slip for constant-tension winding
  • Soft start for heavy loads
  • Overload protection by torque limit
  • No friction plates to wear
  • Matched tension controllers available

How it works

The input rotor is driven by the motor. The output rotor is connected to the load. Magnetic powder in the gap between them stiffens when the coil is energised and carries torque across. Torque follows the coil current closely, giving fine control without mechanical wear on friction plates.

Specifications

Rated Torque6–400 N·m(Model dependent)
Coil Voltage24 V DC(Standard)
Max Input SpeedUp to 1500 rpm(Model dependent)
CoolingNatural, fan or water(By slip power)
ControllerManual or automatic tension(Supplied separately)

Final datasheet issued per confirmed application.

Applications

Rewinders on slitting machines, fabric batching and take-up, wire and cable take-up, packaging machines, and torque limiting and test rigs.

Frequently asked questions

Clutch or brake for my machine?

A brake is used on unwinding, a clutch on rewinding or when a motor drives the load.

Can it run continuously while slipping?

Yes, within its rated slip power. Larger loads need fan or water cooling.

Can you supply the controller too?

Yes, manual and automatic tension controllers are available.

Request a quote

Quotation for the Magnetic Powder Clutch

Five fields. You will have an indicative specification and price as soon as possible.

The three things our engineers need to size the equipment.

We use your details only to answer this enquiry. See our Privacy Policy.

WhatsApp us