Magnetic SeparatorsManufactured in Pakistan
Magnetic Coolant Separator
Cleans steel swarf out of machine coolant automatically
Grinding and honing machines fill their coolant with fine steel sludge, which spoils surface finish and wears pumps. The magnetic coolant separator takes dirty coolant from the machine, runs it past a slowly turning magnetic drum, and returns it clean to the tank. The drum carries the sludge up and out, where a rubber squeeze roller presses out the liquid and a scraper drops the dry sludge into a bin. It runs all day without filter paper or cartridges. Units are sized by flow in litres per minute and can be combined with a paper band filter for very fine finishing.
- Continuous cleaning, no filter media to replace
- Squeeze roller leaves sludge drier
- Stainless drum shell
- Sized by coolant flow
- Can be added to existing machines
- Optional paper band filter after the drum
How it works
Dirty coolant flows into a tank under the drum. Magnets inside the stainless drum shell attract the steel particles, and the drum rotation lifts them out of the liquid. A squeeze roller presses coolant out of the sludge before a scraper removes it. Clean coolant overflows to the machine tank.
Specifications
| Coolant Flow | 25–400 L/min(Per unit) |
|---|---|
| Drum Width | 150–600 mm(Sized to flow) |
| Drive | 0.1–0.25 kW gear motor(Continuous) |
| Sludge Removal | Squeeze roller and scraper(Standard) |
| Coolant Type | Water-soluble or neat oil(Confirmed at order) |
Final datasheet issued per confirmed application.
Applications
Surface, centreless and cylindrical grinders, honing and lapping machines, gear cutting, and auto parts and bearing workshops.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
Does it remove non-steel particles?
Only steel and iron particles. For grinding wheel dust and non-ferrous fines add a paper band filter after it.
Can it be fitted to an old machine?
Yes. It sits beside the machine tank and only needs a pipe connection and a small power supply.
Are filter consumables needed?
No. The drum cleans itself continuously.
Request a quote
Quotation for the Magnetic Coolant Separator
Five fields. You will have an indicative specification and price as soon as possible.
More magnetic separators
All magnetic separatorsWet Drum Magnetic Separator
A magnetic drum running in a tank of slurry, used to recover magnetite or to remove iron-bearing particles from mineral and ceramic slurries.
ViewRare Earth Roll Separator
A thin belt running over a rare earth magnetic roll that pulls out weakly magnetic impurities such as iron oxide and mica from dry sand, feldspar and other minerals.
ViewMagnetic Sweeper
A wheeled permanent magnet bar that picks up nails, screws, wire and swarf from factory floors, yards, workshops and roads, with a release lever for easy dumping.
ViewMagnetic Chip Conveyor
A conveyor with magnets running underneath a stainless or non-magnetic bed, dragging steel chips, swarf and small parts out of machines without any belt or chain on top.
View