Magnetic SeparatorsManufactured in Pakistan
Liquid Trap Magnet
Removes iron from liquids and slurries flowing in a pipe
Iron in liquids damages pumps, nozzles and filling heads, and ends up in the finished product. A liquid trap magnet is a cylindrical housing with inlet and outlet ports and a cluster of magnetic rods mounted on the lid. Liquid flows around the rods and iron sticks to them. Lifting the lid brings all the rods out together for cleaning. We size the housing so the flow slows down inside, giving iron more time near the rods, and choose port sizes and connections to match your piping, from threaded to flanged and tri-clamp for food lines.
- Rod cluster lifts out with the lid
- Body sized to slow the flow for better capture
- Threaded, flanged or tri-clamp ports
- Pressure rated to suit your line
- SS 304 or SS 316 construction
- Drain port and pressure gauge on request
How it works
Liquid enters the housing, slows down because the body is wider than the pipe, and passes between vertical magnetic rods. Iron is held on the rods while clean liquid leaves through the outlet. For cleaning, the line is isolated, the lid is opened and the rod assembly is lifted out and wiped.
Specifications
| Port Size | 1–6 inch (25–150 mm)(Threaded, flanged or tri-clamp) |
|---|---|
| Magnetic Field Intensity | Up to 12,000 Gauss(At rod surface) |
| Working Pressure | Up to 10 bar(Higher on request) |
| Rods | 4–12(Sized to flow) |
| Material | SS 304 / SS 316(Per liquid) |
Final datasheet issued per confirmed application.
Applications
Edible oil and ghee refining, sugar syrup and juice, liquid detergents, paints and inks, textile dyes and chemicals, ceramic slip and glaze.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
Can it handle thick liquids?
Yes, with wider rod spacing and a larger body. Tell us the viscosity and flow.
How is it cleaned?
Isolate the line, open the lid and lift out the rod assembly, then wipe or sleeve-strip the rods.
Is it suitable for food liquids?
Yes, in SS 316 with tri-clamp connections and food-grade seals.
Request a quote
Quotation for the Liquid Trap Magnet
Five fields. You will have an indicative specification and price as soon as possible.
More magnetic separators
All magnetic separatorsMagnetic Coolant Separator
A rotating magnetic drum unit that lifts fine steel particles out of the coolant from grinding and machining, so cleaner coolant goes back to the machine.
ViewWet Drum Magnetic Separator
A magnetic drum running in a tank of slurry, used to recover magnetite or to remove iron-bearing particles from mineral and ceramic slurries.
ViewRare Earth Roll Separator
A thin belt running over a rare earth magnetic roll that pulls out weakly magnetic impurities such as iron oxide and mica from dry sand, feldspar and other minerals.
ViewMagnetic Sweeper
A wheeled permanent magnet bar that picks up nails, screws, wire and swarf from factory floors, yards, workshops and roads, with a release lever for easy dumping.
View