Magnetic Brakes & ClutchesManufactured in Pakistan
Magnetic Powder Brake
Smooth, adjustable braking torque for unwinding and tension control
On an unwinder, the brake decides the tension of the whole line. A magnetic powder brake gives torque that depends only on the current in its coil, not on speed, so tension stays steady from a full roll to an empty core. Fine magnetic powder fills the gap between the rotor and the housing; when current flows, the powder links them and resists rotation. Torque goes up and down smoothly with no jerks, which protects yarn, fabric and film from breaks and wrinkles. It is paired with a manual or automatic tension controller.
- Torque set by DC current, independent of speed
- Smooth start with no jerk
- Shaft or hollow shaft mounting
- Natural, fan or water cooling
- Works with manual or automatic tension controller
- Rebuild service for worn units
How it works
When the coil is energised, the magnetic powder inside forms chains between rotor and stator and transmits torque. More current means stiffer chains and more torque. With no current the powder falls loose and the shaft turns almost freely. Heat from slip is removed by fins, fans or water cooling on larger sizes.
Specifications
| Rated Torque | 6–400 N·m(Model dependent) |
|---|---|
| Coil Voltage | 24 V DC(Standard) |
| Mounting | Shaft or hollow shaft(To your machine) |
| Cooling | Natural, fan or water(By slip power) |
| Controller | Manual or automatic tension(Supplied separately) |
Final datasheet issued per confirmed application.
Applications
Unwinders on slitting and rewinding machines, fabric and yarn let-off, printing and laminating, wire and cable payoff, and test benches.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
How long does the powder last?
It depends on slip power and hours. Worn units can be refilled and rebuilt.
Do I need a controller?
Yes. A manual controller sets fixed current; an automatic one adjusts it as the roll diameter changes.
Can it replace my imported brake?
Usually yes. Share the model or torque, shaft size and mounting.
Request a quote
Quotation for the Magnetic Powder Brake
Five fields. You will have an indicative specification and price as soon as possible.