Magnetic SeparatorsManufactured in Pakistan
Magnetic Sweeper
Push or tow type magnet for picking up nails and scrap from floors and roads
Loose nails and metal pieces on a factory floor or yard puncture tyres and injure workers. A magnetic sweeper clears them in minutes. It is a long permanent magnet bar mounted on wheels, either pushed by hand or towed behind a forklift or tractor. As it passes over the ground, metal is lifted and held on the underside. At the scrap bin, a lever pulls the magnet up inside its housing and everything drops off at once. We make hand models for workshops and wide tow models for yards, car parks and construction sites.
- Hand push and tow-behind models
- Quick release lever for dumping
- Adjustable height above the ground
- Rubber wheels for indoor use
- No power needed
- Strong steel channel body
How it works
A ferrite or neodymium magnet is housed in a steel channel with its face pointing down. Wheels hold it at a set height above the ground. A release lever lifts the magnet away from the bottom plate, which weakens the field at the plate and lets the collected metal fall.
Specifications
| Sweeping Width | 450–1800 mm(Hand or tow model) |
|---|---|
| Ground Clearance | 25–75 mm(Adjustable) |
| Release | Quick-release lever(Standard) |
| Magnet Type | Ferrite or Neodymium(Selected per use) |
| Power Requirement | None(Fully passive operation) |
Final datasheet issued per confirmed application.
Applications
Factory floors and warehouses, workshops and machine shops, construction sites, scrap yards, roads and parking areas, and airport aprons.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
Will it pick up stainless steel?
No. Most stainless grades are not magnetic. It picks up iron and ordinary steel.
Can it be towed by a forklift?
Yes, the tow models have a hitch for forklifts, tractors and utility vehicles.
How is the metal dropped off?
Pull the release lever over the bin and everything falls off at once.
Request a quote
Quotation for the Magnetic Sweeper
Five fields. You will have an indicative specification and price as soon as possible.
More magnetic separators
All magnetic separatorsMagnetic Chip Conveyor
A conveyor with magnets running underneath a stainless or non-magnetic bed, dragging steel chips, swarf and small parts out of machines without any belt or chain on top.
ViewPermanent Magnetic Lifter
A permanent magnet lifter with an on-off handle, used with a hoist or crane to lift steel plates, blocks and round bars in workshops and stores.
ViewBlowroom Magnet (Cotton Metal Extractor)
A magnet assembly fitted in the blowroom ducting that catches bale hoops, wire and iron pieces in opened cotton before they reach the cleaners and cards.
ViewWet High Intensity Magnetic Separator (WHIMS)
An electro-magnetic separator with a high-gradient matrix that pulls very fine iron-bearing particles out of kaolin, china clay, feldspar and other mineral slurries.
View