Skip to content

Magnetic SeparatorsManufactured in Pakistan

Blowroom Magnet (Cotton Metal Extractor)

Stops iron in cotton before it reaches cards and starts a fire

Iron in cotton bales is a fire risk in any spinning mill. A spark from a hoop or nail hitting a beater can light the fibre and spread through the duct. The blowroom magnet sits in the cotton transport duct, usually after the bale opener, and holds iron pieces out of the air stream. It is built with strong permanent magnets mounted behind a smooth plate so cotton does not snag, and a door allows the iron to be removed during the shift. It is used together with, not instead of, metal detectors and spark diverters.

  • Made to your duct size and shape
  • Smooth face so cotton does not catch
  • Strong permanent magnets, no power
  • Access door for cleaning
  • Reduces fire risk from iron in bales
  • Works alongside metal detectors

How it works

Opened cotton is carried by air through the duct. The magnet section has a magnetised plate or a magnetic hump in the duct wall. Iron pieces are pulled out of the fibre stream and held on the plate. Cleaning is done through a door at fixed intervals.

Specifications

Duct Size200–450 mm(Round or square)
Magnetic Field IntensityUp to 8000 Gauss(At plate face)
PositionAfter bale opener(Layout dependent)
CleaningAccess door(Per shift)
Power RequirementNone(Fully passive operation)

Final datasheet issued per confirmed application.

Applications

Spinning mill blowrooms, cotton waste and recycling lines, ginning factories, and synthetic fibre opening lines.

Frequently asked questions

Is a magnet enough to prevent fires?

No. It removes iron, but you still need metal detectors, spark detection and good housekeeping.

Will cotton catch on the magnet?

No. The face is smooth and shaped to let fibre slide past.

Where is it installed?

Usually in the duct just after the bale opener, before the first cleaner.

Request a quote

Quotation for the Blowroom Magnet (Cotton Metal Extractor)

Five fields. You will have an indicative specification and price as soon as possible.

The three things our engineers need to size the equipment.

We use your details only to answer this enquiry. See our Privacy Policy.

WhatsApp us