Magnetic SeparatorsManufactured in Pakistan
Permanent Magnetic Lifter
Hand-operated lifting magnet that needs no electricity
For lifting steel plate and blocks in a workshop, a permanent magnetic lifter is quicker and safer than chains and clamps. It hangs from a hoist hook and has a single handle. Turning the handle on rotates the internal magnet so the field passes into the steel; turning it off returns the field inside the lifter and releases the load. There is no power cable and nothing to fail if the electricity goes. Lifters carry a rated load with a safety factor, and the base has a V-groove so round bar can be lifted too.
- No electricity, no cable
- Single handle on and off with lock
- V-groove base for round bar
- Rated load with built-in safety factor
- Compact, light body
- Test certificate on request
How it works
Inside the steel body, a rotating neodymium magnet sits between two fixed magnets. In the off position their fields cancel inside the body. Turning the handle lines them up and pushes the field into the load. A lock holds the handle in the on position until the operator releases it.
Specifications
| Rated Load (Flat Steel) | 100–3000 kg(Model dependent) |
|---|---|
| Safety Factor | 3:1(On rated load) |
| Round Bar Capacity | About half of flat rating(V-groove base) |
| Minimum Plate Thickness | 10–40 mm(Model dependent) |
| Power Requirement | None(Handle operated) |
Final datasheet issued per confirmed application.
Applications
Fabrication workshops, steel stockists, machine shops loading machines, die and mould shops, and scrap handling of clean steel pieces.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
What if the power fails while lifting?
Nothing happens. It is a permanent magnet and needs no power to hold the load.
Can it lift rusty or painted plate?
Yes, but capacity drops with rust, paint, gaps and thin plate. Use a lifter with spare capacity.
Can it lift round bar?
Yes, using the V-groove in the base, at a lower rating.
Request a quote
Quotation for the Permanent Magnetic Lifter
Five fields. You will have an indicative specification and price as soon as possible.
More magnetic separators
All magnetic separatorsBlowroom Magnet (Cotton Metal Extractor)
A magnet assembly fitted in the blowroom ducting that catches bale hoops, wire and iron pieces in opened cotton before they reach the cleaners and cards.
ViewWet High Intensity Magnetic Separator (WHIMS)
An electro-magnetic separator with a high-gradient matrix that pulls very fine iron-bearing particles out of kaolin, china clay, feldspar and other mineral slurries.
ViewOverband Electro Magnet Separator
A suspended, powered magnet mounted crosswise or in-line over a conveyor that lifts and continuously discharges large ferrous tramp metal out of the material stream.
ViewOverband Permanent Magnet Separator
A suspended permanent-magnet unit that lifts ferrous tramp metal off a conveyor without needing an electrical power connection.
View