Magnetic SeparatorsManufactured in Pakistan
Magnetic Rod (Bar Magnet)
Single sealed magnetic tubes for building your own grates and traps
The magnetic rod is the working part inside most of our dry and liquid separators, also supplied loose. Plants use single rods across a chute, inside a bin, or to replace a weak tube in an older grate. Every rod is built from a stack of magnets and steel pole pieces inside a seamless stainless tube, welded or capped at both ends so no product can get inside. Standard diameter is 25 mm, with 32 mm and larger for heavy flows, and any length from 100 mm up. Threaded ends, flats or tapped holes can be added so the rod fits an existing frame.
- 25 mm standard diameter, 32 mm and larger on order
- Any length from 100 mm
- Neodymium or ferrite core
- Threaded, flat or tapped ends to suit your frame
- Seamless SS 304 or SS 316 tube, fully sealed
- Can be checked with a gauss meter on request
How it works
Inside the tube, magnets are placed with like poles facing each other and a steel disc between them. This pushes the field out through the tube wall and makes it strongest at each pole piece, where iron particles collect in rings. The more pole pieces per metre, the better the rod is at catching fine iron.
Rods are cleaned by wiping, or by pulling them through a close-fitting plastic sleeve.
Specifications
| Diameter | 25 mm(32 mm and larger on order) |
|---|---|
| Magnetic Field Intensity | Up to 12,000 Gauss(At tube surface, neodymium) |
| Length | 100–1500 mm(Any length to order) |
| Magnet Type | Neodymium or Ferrite(Selected per application) |
| End Fitting | Plain, threaded or tapped(To fit your frame) |
Final datasheet issued per confirmed application.
Applications
Replacement tubes for grate, drawer and hopper magnets; chutes and bins in flour, feed and food plants; plastic hoppers; liquid traps; laboratory and quality-control checks.
Warranty & policies
- Terms & ConditionsThe terms that apply when you use latifengineering.com, request a quotation or place an order with Latif Engineering.Read the policy
- Privacy PolicyWhat information latifengineering.com collects when you send an enquiry or visit the website, why we collect it and how we look after it.Read the policy
Frequently asked questions
Will a new rod fit my old grate?
Send us the diameter, length and end fitting of the old tube and we will make it to match.
Neodymium or ferrite?
Neodymium catches fine iron dust; ferrite is enough for nails, bolts and larger pieces.
Do rods lose strength over time?
Very slowly in normal use. High heat is what weakens them, so tell us if the product is hot.
Request a quote
Quotation for the Magnetic Rod (Bar Magnet)
Five fields. You will have an indicative specification and price as soon as possible.
More magnetic separators
All magnetic separatorsHopper Magnet
A compact magnet housing that bolts between the hopper and the feed throat of an injection moulding, blow moulding or extrusion machine.
ViewDrawer Magnet
A dust-tight housing with two or three rows of magnetic tubes that slide out like drawers, fitted in-line on gravity chutes carrying powders and granules.
ViewRotating Grate Magnet
A grate magnet whose tubes rotate slowly, so sticky or poor-flowing product such as sugar, cocoa or milk powder keeps moving instead of blocking the chute.
ViewPneumatic Line Magnet
A flanged magnet housing fitted directly into a pneumatic conveying pipe, catching iron from powders and granules moving at speed under pressure or vacuum.
View